Инструкция по самостоятельной заправке картриджей HP 178.
Этот метод также работает для заправки HP 920 чернильных емкостей.
To fill the HP Cartridge 364 you need:
Syringe with a cannula, Driller (1,5mm), Scale
OEM code HP 178 BK; HP 178 C/M/Y; HP 178 BK HC; HP 178 C/M/Y HC
empty weight 23 g; 18g; 32 g; 18 g
full weight 34 g 24g 54 g; 26 g
Please follow this instruction to fill the cartridge.
Drill at the marked position of the cartridge front a 1,5mm hole (picture 1).
Conduct the cannula with easy spinning trough the sponge until you reach the ink tank.(picture 2)
ATTENTION: This Step is only for HP-364XL, 920XL Cartridges,
The standard cartridges HP-364 and HP-920 please fill just the sponge!
When you fill the cartridges, please show the ink escape upwards, so that the air can leak over the sponge and the fill hole (Picture 3).
Is the additional tank complete filled, turn the cartridge in their normal position (Picture 4) and wait a moment, so that the ink can go into the sponge. Is the sponge complete saturated with ink, fill the additional tank again and pull the cannula carefully out of the cartridge.
Advantage of this variety is that you didn’t need to close your filling hole with glue or tape. (I’m not sure about this step)
Инструкция предоставлена службой техподдержки OCP Gmbh.
__________________________________________________________________________________________________________________________
Инструкция как заправить оригинальные картриджи HP #178 на русском языке:
http://печатай.su/download/file. ... iew&id=331